Shenzhen Yanbixin Technology Co., Ltd.
Customer first, Quality assurance, Integrity-based
Add to Cart
YX93G4-50A-S 100A High Current 520V 3 Phase Delta RFI Filter 3 Phase Power Line Filter
Three Phase Filter:
Our three-phase filter is a passive filter used to reduce or eliminate unwanted electromagnetic interference in three-phase power systems. Three-phase power supplies are used in many industrial and commercial applications to provide a more efficient and stable power supply than single-phase power supplies.
Feature Of Three Phase Filter:
1. For 3-phase, four wire, WYE Applications
2. Good attenuation over the complete frequency range of 10KHz to
30MHz
3. Two different mounting styles available
4. Cost-effective, universal 3-phase fifilters
5. Insulated, high quality safety terminals for input and output
Three Phase Filter Applications:
-- 3-phase inverters
-- Variable speed motor drives
-- Three-phase power system
-- Process automation equipment
YX93G4-50A-S Parameters:
| Item | 3 Phase Power Line Filter |
| Model | 3 Phase EMI Filter -YX91G series |
| Transfer Function | Low Pass |
| Package Type | Surface Mount |
| Nominal Center Frequency | 10K-30MHZ |
| Insertion Loss | 60~90dB |
| Input Impedance | 50Ω |
| Rated Voltage | 300V/520V |
| Rated Current | 1A-100A |
| Environmental Temperature | 40°C |
| Temperature Range | 25 / 085 / 21 |
| Operating Frequency | 50/60HZ |
| Line to Line | 1450VDC |
| Line to Ground | 2250VDC or 2000VAC |
| Maximum Leakage Current | 115VAC/60HZ 1.4mA Max. 250VAC/60HZ 2.5mA Max |
Rule of Nomination:
YX------91--------G1--------10A-----------Q
¦ ¦ ¦ ¦
circuit case current connection
YX93G4 Product Picture:
Tabulates:
| Model No. | Rated Current @40°C | Terminal Options* | Leakage current 440V/50H | Electrical Schematic | Rated Voltage(V) | Operating Frequency(Hz) | ||
| YX93G2-3A | 3A | Q | S | T | <5.0mA | Fig.1 | 250/440V | 50/60Hz |
| YX93G2-6A | 6A | Q | S | T | Fig.1 | |||
| YX93G2-10A | 10A | Q | S | T | Fig.1 | |||
| YX93G3-15A | 15A | Q | S | T | Fig.1 | |||
| YX93G3-20A | 20A | - | S | T | Fig.1 | |||
| YX93G3-25A | 25A | - | S | T | Fig.1 | |||
| YX93G3-30A | 30A | - | S | T | Fig.1 | |||
| YX93G5-40A | 40A | - | S | T | <10.0mA | Fig.1 | ||
| YX93G5-50A | 50A | - | S | T | Fig.1 | |||
| YX93G4-60A | 60A | - | S | T | Fig.1 | |||
| YX93G4-70A | 70A | - | S | T | Fig.1 | |||
| YX93G4-80A | 80A | - | S | T | Fig.1 | |||
| YX93G4-100A | 100A | - | S | T | <20.0mA | Fig.1 | ||
| YX93G4-130A | 130A | - | S | T | Fig.1 | |||
| YX93G6-150A | 150A | - | S | T | Fig.1 | |||
| YX93G6-200A | 200A | - | S | T | Fig.1 | |||
*Q: Fast-on 6.35x0.8mm S: Screw lug T: Terminal block
| Case | A | B | C | D | E | F | G | H | I | J | K | L | M | ||||||||||||||||||||||||||||||
| G1 | 72 | 65 | 39 | 75 | 85 | 35 | 22 | 45 | M4 | M4/M6 | |||||||||||||||||||||||||||||||||
| G2 | 98 | 80 | 40 | 95 | 105 | 50 | 20 | 4.5*6.5 | 50 | M4 | M4/M6 | ||||||||||||||||||||||||||||||||
| G3 | 120 | 100 | 50 | 115 | 130 | 50 | 28 | 4*6 | 60 | M4 | M4/M6 | ||||||||||||||||||||||||||||||||
| G4 | 200 | 127 | 80 | 150 | 170 | 62 | 49.5 | 6*9 | 117 | M6/M8 | M8/M10 | ||||||||||||||||||||||||||||||||
| G5 | 150 | 105 | 60 | 120 | 135 | 55 | 35 | 4*6 | 90 | M6 | M8 | ||||||||||||||||||||||||||||||||
| G6 | 260 | 170 | 100 | 196 | 220 | 85 | 65 | 8*12 | 172 | M8 | M10 | ||||||||||||||||||||||||||||||||
| Tolerances | ±1 | ±1 | ±1 | ±0.15 | ±1 | ±0.5 | ±0.5 | ±0.15 | ±0.15 | ±0.15 | ±0.15 | ±2 | |||||||||||||||||||||||||||||||
Insertion loss table(In 50ohm system according IEC/CISPR No.17)
6/10A 20A/30A
40A/50A 80A
100A/200A